Comments for Armin76's Blog

Comment on The new BeagleBone Black and Gentoo by Raúl Porcel

Raúl Porcel — Sat, 18 May 2013 11:49:35 +0000

Thanks, will fix that

Comment on The new BeagleBone Black and Gentoo by gens

gens — Thu, 09 May 2013 19:24:39 +0000

it is sys-devel/crossdev instead of dev-util/crossdev now

Comment on The new BeagleBone Black and Gentoo by Raúl Porcel

Raúl Porcel — Fri, 03 May 2013 14:08:18 +0000

Hope this answers your question: https://groups.google.com/forum/?fromgroups=#!topic/beagleboard/gecVXh8c9f4

Comment on The new BeagleBone Black and Gentoo by anon

anon — Fri, 03 May 2013 09:10:29 +0000

is it still possible to use an external JTAG adapter?

Comment on The new BeagleBone Black and Gentoo by Raúl Porcel

Raúl Porcel — Thu, 02 May 2013 14:57:29 +0000

To be honest, no. I’m not sure what kind of drivers this accepts, apart from fb. Maybe xf86-video-omap? I can’t test either, because i have an A4 revision board, which had non-working SGX part.

Comment on The new BeagleBone Black and Gentoo by Disney

Disney — Mon, 29 Apr 2013 18:57:54 +0000

Thanks for the writeup. I’m tempted to buy one of these boards but i am curious have you tried getting video acceleration running?

Comment on Beaglebone and Gentoo by The new BeagleBone Black and Gentoo | Armin76's Blog

The new BeagleBone Black and Gentoo | Armin76's Blog — Sun, 28 Apr 2013 18:02:35 +0000

[...] This board is a new version of the original BeagleBone, known in the community as BeagleBone white, for which I wrote a post for it: http://armin762.wordpress.com/2012/01/01/beaglebone-and-gentoo/ [...]

Comment on Beaglebone documentation updated by Paul

Paul — Fri, 19 Oct 2012 19:56:03 +0000

Many thanks for that – very clear and easily understood documentation. I followed your instructions, and only had one issue: When linking net.eth0 and sshd, the links were pointing to /media/rootfs/etc/init.d/net.eth0 and [same root path]/sshd. In the booted environment on the beaglebone, these paths don’t exist. I then created the links via the sd card on my main pc with “ln -s /etc/init.d/net.eth0 /media/rootfs/etc/runlevels/default/” which created the links correctly.
You might want to modify the documentation accordingly (or let me know what I did wrong!). Also, it is worth setting up a sync to the local gentoo pc to get the latest portage, but I recognise this is probably beyond your documentation. You could put a link in though to the relevant file.

Thanks again!

Comment on Beaglebone and Gentoo by Beaglebone documentation updated « Armin76's Blog

Beaglebone documentation updated « Armin76's Blog — Fri, 12 Oct 2012 19:03:43 +0000

[...] bug (by design the said) which made the USB port stop working after unplugging a device (check my post about the Beaglebone) is now [...]

Comment on Pandaboard and Gentoo: Part Two (Running Gentoo!) by zdavatz

zdavatz — Fri, 13 Jul 2012 11:21:42 +0000

Please let me know if you get the WIFI working! I will test it on my Pandaboard too! Gentoo runs very smooth on the Pandaboard! Thanks for the great Howto.